Reference Guide

LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PR28
Message Unable to locate device in current configuration.
Detailed
Description
The device that the job was intended for is no longer detected. This could be due
to the device being removed, disabled, or a failure.
Recommended
Response
Action
If the device was removed, reinsert the device and retry the operation. If the device
was disabled, re-enable the device and retry the operation.
Category Configuration
Subcategory PR = Part Exchange
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PR29
Message Unable to locate device in previous configuration.
Detailed
Description
The device that the job was intended for has no previous information recorded.
The request has failed as this information is required to initiate the operation. This
has been deprecated.
Recommended
Response
Action
Enable the Collect System Inventory on Restart attribute of the Lifecycle Controller
and restart the system. Alternatively, use the Unified Server Configurator utility.
Category Configuration
Subcategory PR = Part Exchange
961