Reference Guide

Trap/EventID 4345
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
2347
Server
Administrator
Trap ID
90400
PDR62
Message The rebuild failed due to errors on the target arg1 .
Arguments
• arg1 = physical disk
Detailed
Description
It is not possible to rebuild data that resides on a defective disk.
Recommended
Response
Action
Replace the target disk. If a rebuild does not automatically start after replacing the
disk, then initiate the Rebuild task. You may need to assign the new disk as a hot
spare to initiate the rebuild.
Category Storage
Subcategory PDR = Physical Disk
Severity Severity 1 (Critical)
Trap/EventID 4345
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
2348
Server
Administrator
Trap ID
90400
PDR63
Message A bad disk block on arg1 cannot be reassigned during a write operation.
Arguments
• arg1 = physical disk
921