Reference Guide

Detailed
Description
The bad block table is the table used for remapping bad disk blocks. This table fills
as bad disk blocks are remapped. When the table is full, bad disk blocks are no
longer remapped, which means that disk errors are no longer corrected. At this
point, data loss can occur. The bad block table is now 80 percent full.
Recommended
Response
Action
Replace the disk generating this message.
Category Storage
Subcategory PDR = Physical Disk
Severity Severity 2 (Warning)
Trap/EventID 4346
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
2306
Server
Administrator
Trap ID
90300
PDR57
Message Bad block table on arg1 is full. Unable to log block arg2 .
Arguments
• arg1 = physical disk
• arg2 = logical block address
Detailed
Description
The bad block table is the table used for remapping bad disk blocks. This table fills
as bad disk blocks are remapped. When the table is full, bad disk blocks are no
longer remapped, which means that disk errors are no longer corrected. At this
point, data loss can occur.
Recommended
Response
Action
Replace the disk generating this message and restore from a backup copy. You
may have lost data.
Category Storage
Subcategory PDR = Physical Disk
Severity Severity 1 (Critical)
Trap/EventID 4345
LCD Message No LCD message display defined.
Initial Default LC Log
917