Reference Guide

Server
Administrator
Trap ID
Not Applicable
OSD35
Message Lifecycle Controller is not enabled.
Detailed
Description
Lifecycle Controller is disabled on the system, so none of the remote operating
system deployment commands will work. Make sure Lifecycle Controller is enabled
before running any command.
Recommended
Response
Action
Reboot the system and enable System Services by pressing CTRL+E option when
prompted to do so in the POST. This launches the iDRAC configuration utility
where Lifecycle Controller can be enabled.
Category Configuration
Subcategory OSD = OS Deployment
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
OSD36
Message Boot to ISO Image has been cancelled by using CTRL+E option on the server.
Detailed
Description
User has cancelled system services by using the CTRL+E option (iDRAC
configuration utility) during POST. This action cancels the WSMAN request to boot
to ISO.
Recommended
Response
Action
To resolve the issue rerun the command. Do not cancel system services using
CTRL+E during POST when system is rebooting to the ISO.
Category Configuration
Subcategory OSD = OS Deployment
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
789