Reference Guide

MEM6000
Message Memory device monitoring is disabled.
Detailed
Description
The memory module may not be correctly seated, wrongly configured, or has
failed.
Recommended
Response
Action
Review the Embedded System Management (ESM) Log for memory exceptions. Re-
install the memory modules.
Category System Health
Subcategory MEM = Memory
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default OS Log;None
Server
Administrator
Event ID
5400
Server
Administrator
Trap ID
Not Applicable
MEM6001
Message Memory device status is unknown. Memory device location: arg1 , Possible
memory module event cause: arg2 .
Arguments
• arg1 = location
• arg2 = cause
Detailed
Description
The memory module may not be correctly seated, wrongly configured, or has
failed.
Recommended
Response
Action
Review the Embedded System Management (ESM) Log for memory exceptions. Re-
install the memory modules at the identified location .
Category System Health
Subcategory MEM = Memory
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default OS Log;None
737