Reference Guide

Detailed
Description
Lifecycle Controller is in use by another process. Wait for other process to
complete before attempting to run another command.
Recommended
Response
Action
Try one of the following: 1) Rerun the command after about 2 minutes. 2) Make
sure that Lifecycle Controller Unified Server Configurator or an Update Package is
not currently running on the server 3) Reset iDRAC and rerun the command.
Category Configuration
Subcategory LC = Lifecycle Contr
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
LC013
Message A configuration job cannot be created because there are no pending values to
change.
Detailed
Description
No changes are available between the previous configuration and the current
configuration. At least one attribute should be changed to create a configuration
job.
Recommended
Response
Action
Change the configuration of one or more attributes before creating a configuration
job.
Category Configuration
Subcategory LC = Lifecycle Contr
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
633