Reference Guide

LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
LC005
Message Invalid firmware update mode.
Detailed
Description
The value provided for the update mode parameter is invalid.
Recommended
Response
Action
Verify that the correct firmware update mode was entered. The choices are: 1)
Disable (default) 2)Allow version upgrade only 3) Match firmware of replaced part.
Category Configuration
Subcategory LC = Lifecycle Contr
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
LC006
Message Invalid Auto-Discovery action.
Detailed
Description
The Auto-Discovery action selected is invalid.
Recommended
Response
Action
Verify that the selected Auto-Discovery action is supported. The supported
commands are documented in the Lifecycle Controller User Guide.
Category Configuration
Subcategory LC = Lifecycle Contr
628