Reference Guide

Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
LC003
Message Failed to change the firmware update mode.
Detailed
Description
An error occurred while trying to set the firmware update mode.
Recommended
Response
Action
Verify that the firmware version supports this mode. Also confirm that the
command and parameters are correct. The parameter choices are: 1) Disable
(default) 2) Allow version upgrade only 3) Match firmware of replaced part.
Category Configuration
Subcategory LC = Lifecycle Contr
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
LC004
Message Provisioning Server information is not formatted correctly.
Detailed
Description
The Provisioning Server parameter information is not formatted correctly.
Recommended
Response
Action
Verify the string format. Enter a valid IP address or hostname for the Provisioning
Server such as: 1) hostname 2) hostname.domain.com 3) 1.1.1.1 4) hostname:8080
5) hostname.dell.com:8080 6) hostname1:80,hostname2:8080
Category Configuration
Subcategory LC = Lifecycle Contr
Severity Severity 2 (Warning)
627