Reference Guide

Recommended
Response
Action
If the job was not cancelled manually, then Lifecycle Controller may be in Recovery
mode. To verify or change Recovery mode, use F2 Setup to select iDRAC
Configuration then Lifecycle Controller Settings.
Category Configuration
Subcategory JCP = Job Control
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
JCP010
Message The command was successful.
Detailed
Description
The method invoked was successfully completed.
Recommended
Response
Action
No response action is required.
Category Configuration
Subcategory JCP = Job Control
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
JCP018
Message Cannot create new jobs until the existing Export job is completed or the job is
cancelled.
618