Reference Guide

26
ISM Event Messages
ISM0000
Message The iDRAC Service Module is started on the operating system (OS) of server.
Detailed
Description
The iDRAC Service Module is started on the OS of server.
Recommended
Response
Action
No response action is required.
Category Audit
Subcategory ISM = iDRAC Service Module
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
ISM0001
Message The iDRAC Service Module detected a OS to iDRAC Pass-through in the arg1
mode. Switch the OS to iDRAC Pass-through to a USB NIC mode.
Arguments
• arg1 = mode
Detailed
Description
The iDRAC Service Module detected a OS to iDRAC Pass-through mode as
identified in the message. iDRAC Service Module will automatically connect to
iDRAC after the OS to iDRAC Pass-through is configured to the USB NIC mode.
Recommended
Response
Action
Configure OS to iDRAC Pass-through to the USB NIC mode by running the
commands: 1) racadm set idrac.os-bmc.PTMode usb-p2p 2) racadm set idrac.os-
bmc.UsbNicIpAddress <ip address> 3) racadm set idrac.os-bmc.adminstate
enabled
599