Reference Guide

Detailed
Description
The iDRAC has applied I/O Identity settings on NIC and FC HBA devices. All the
device configuration related to virtual addresses, initiator and target settings have
been configured successfully according to the current persistence policy settings.
Recommended
Response
Action
No response action is required.
Category Configuration
Subcategory IOID = IO Identity Optimization
Severity Severity 3 (Informational)
Trap/EventID 10771
LCD Message No LCD message display defined.
Initial Default SNMP Alert;EMAIL Alert;LC Log;None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
IOID118
Message Unable to configure some or all I/O Identity settings based on current persistence
policy settings.
Detailed
Description
The iDRAC has applied I/O Identity Configuration on NIC and FC HBA devices. One
or more of the setting configuration operations did not complete successfully.
Recommended
Response
Action
Review the previous log entries and identify the devices that did not successfully
complete configuration operations. For the identified devices, do the following and
then restart the server: 1) Make sure the device is installed properly. 2) Make sure
the device has latest firmware installed. If the issue persists, contact your service
provider.
Category Configuration
Subcategory IOID = IO Identity Optimization
Severity Severity 2 (Warning)
Trap/EventID 10770
LCD Message No LCD message display defined.
Initial Default SNMP Alert;EMAIL Alert;LC Log;None
Server
Administrator
Event ID
Not Applicable
592