Reference Guide

Server
Administrator
Trap ID
Not Applicable
IOID114
Message The target settings properties of the NIC arg1 Port arg2 are successfully configured.
Arguments
• arg1 = controller
• arg2 = port
Detailed
Description
The target setting properties of the NIC port identified in the message are
successfully configured.
Recommended
Response
Action
No response action is required.
Category Configuration
Subcategory IOID = IO Identity Optimization
Severity Severity 3 (Informational)
Trap/EventID 10771
LCD Message No LCD message display defined.
Initial Default SNMP Alert;EMAIL Alert;LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
IOID115
Message Unable to configure the target settings properties of the NIC arg1 Port arg2 .
Arguments
• arg1 = controller
• arg2 = port
Detailed
Description
The target settings properties of the NIC port identified in the message could not
be configured, because either iSCSI or FCoE partition of the network port is not
enabled; or, the network controller is not functioning.
Recommended
Response
Action
Make sure that the iSCSI or FCoE partition of the network port is enabled. Check
whether or not the network controller is working.
590