Reference Guide

Detailed
Description
The initiator properties of the NIC port identified in the message are successfully
configured.
Recommended
Response
Action
No response action is required.
Category Configuration
Subcategory IOID = IO Identity Optimization
Severity Severity 3 (Informational)
Trap/EventID 10771
LCD Message No LCD message display defined.
Initial Default SNMP Alert;EMAIL Alert;LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
IOID113
Message Unable to configure the initiator properties of NIC arg1 Port arg2 .
Arguments
• arg1 = Controller
• arg2 = Port
Detailed
Description
The initiator properties of the NIC port could not be configured because either
iSCSI or FCoE partition of the network port is not enabled, or the network
controller is not functioning.
Recommended
Response
Action
Make sure that the iSCSI or FCoE partition of the network port is enabled. Check
whether or not the network controller is working and then retry the operation.
Category Configuration
Subcategory IOID = IO Identity Optimization
Severity Severity 2 (Warning)
Trap/EventID 10770
LCD Message No LCD message display defined.
Initial Default SNMP Alert;EMAIL Alert;LC Log
Server
Administrator
Event ID
Not Applicable
589