Reference Guide

Recommended
Response
Action
Reinsert the SD card or try a different SD card and retry the operation. If the issue
persists, do one of the following to resolve the error: 1) If the SD card sensor is
installed on the internal SD module, replace the module. 2) If the SD card sensor is
embedded on the system board, replace the system board. . For more information,
contact your service provider.
Category System Health
Subcategory HWC = Hardware Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default SNMP Alert;OS Log;None
Server
Administrator
Event ID
5753
Server
Administrator
Trap ID
5753
HWC8007
Message The SD card has failed. SD card location: arg1 , SD card device type: arg2 , SD card
state: arg3 .
Arguments
• arg1 = location
• arg2 = type
• arg3 = state
Detailed
Description
The SD card sensor detected an SD card failure.
Recommended
Response
Action
Replace the old SD card with a new SD card.
Category System Health
Subcategory HWC = Hardware Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default SNMP Alert;OS Log;None
Server
Administrator
Event ID
5754
581