Reference Guide

Severity Severity 2 (Warning)
Trap/EventID 2330
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
HWC5035
Message An over-temperature event detected on I/O module arg1 .
Arguments
• arg1 = number
Detailed
Description
The I/O module over heated.
Recommended
Response
Action
Do the following: 1) Make sure fans are installed and working correctly. 2) Check
the temperature sensor status for the chassis and make sure it is within the chassis
operating temperature range. 3) Reseat the I/O module to clear the over-
temperature condition. If the problem persists, contact the service provider.
Category System Health
Subcategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID 2329
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
HWC5036
Message A failure is detected on IO module arg1 .
Arguments
• arg1 = number
567