Reference Guide

HWC0016
Message iDRAC communication failure.
Detailed
Description
Lifecycle Controller is unable to communicate with iDRAC.
Recommended
Response
Action
Retry the operation. If the problem persists, 1) Turn off the system and disconnect
the power cord. 2) Wait five seconds. 3) Reconnect the power cord, turn on the
system, and retry the operation.
Category Configuration
Subcategory HWC = Hardware Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
HWC1000
Message The arg1 is present.
Arguments
• arg1 = name
Detailed
Description
None
Recommended
Response
Action
No response action is required.
Category System Health
Subcategory HWC = Hardware Config
Severity Severity 3 (Informational)
Trap/EventID 2331
LCD Message No LCD message display defined.
Initial Default
525