Reference Guide

Detailed
Description
The import operation failed because the vFlash SD card is missing or disabled.
Recommended
Response
Action
Make sure the vFlash SD card is inserted and enabled before retrying the operation.
Category Configuration
Subcategory HWC = Hardware Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
HWC0015
Message iDRAC not responding.
Detailed
Description
iDRAC has encountered a hardware error.
Recommended
Response
Action
Retry the operation. If the problem persists, 1) Turn off the system and disconnect
the power cord. 2) Wait five seconds. 3) Reconnect the power cord, turn on the
system, and retry the operation.
Category Configuration
Subcategory HWC = Hardware Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
524