Reference Guide

Subcategory HWC = Hardware Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
HWC0009
Message Unable to enable vFlash SD card.
Detailed
Description
The vFlash SD card is missing or not inserted correctly. iDRAC is not able to enable
vFlash SD card.
Recommended
Response
Action
Reinsert the vFlash SD card and retry the operation. If the problem persists: 1) Turn
off the system and disconnect the power cord. 2) Wait for five seconds. 3)
Reconnect the power cord, turn on the system, and retry the operation.
Category Configuration
Subcategory HWC = Hardware Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
HWC0010
Message Invalid folder name or USB drive not found.
Detailed
Description
Operation failed because the folder name entered is incorrect or the USB drive is
disconnected.
Recommended
Response
Action
Enter a valid folder name or attach the USB drive and retry the operation.
521