Reference Guide

Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
HWC0003
Message Successfully initialized vFlash SD card.
Detailed
Description
vFlash SD card was successfully initialized.
Recommended
Response
Action
No response action is required.
Category Configuration
Subcategory HWC = Hardware Config
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
HWC0004
Message Unable to initialize vFlash SD card.
Detailed
Description
The vFlash SD card is incorrectly inserted, the vFlash SD card is faulty, or there is an
iDRAC communication failure.
Recommended
Response
Action
Reinsert or replace the vFlash SD card, or reset iDRAC, and retry the operation. If
the problem persists: 1) Turn off the system and disconnect the power cord. 2) Wait
for five seconds. 3) Reconnect the power cord, turn on the system, and retry the
operation.
Category Configuration
Subcategory HWC = Hardware Config
Severity Severity 1 (Critical)
518