Reference Guide

22
HWC Event Messages
HWC0001
Message Unable to complete the operation as there is no response from iDRAC.
Detailed
Description
The error is caused due to iDRAC failure.
Recommended
Response
Action
1) Turn off the system and disconnect the power cord. 2) Wait for five seconds. 3)
Reconnect the power cord and turn on the system.
Category Configuration
Subcategory HWC = Hardware Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
HWC0002
Message Unable to detect vFlash SD card.
Detailed
Description
The vFlash SD Card is either not present or not correctly inserted.
Recommended
Response
Action
Insert the vFlash SD card or reinsert the vFlash SD card, and retry the operation.
Category Configuration
Subcategory HWC = Hardware Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
517