Reference Guide

Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
FAN908
Message The Enhanced Cooling Mode feature is already disabled.
Detailed
Description
The Enhanced Cooling Mode feature is already disabled.
Recommended
Response
Action
No response action required.
Category Configuration
Subcategory FAN = Fan Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
FAN911
Message The attempt to enable the Enhanced Cooling Mode was not successful.
Detailed
Description
The attempt to enable the Enhanced Cooling Mode (ECM) was not successful
because ECM is already enabled or Gen3 fans are not present in the Chassis.
Recommended
Response
Action
Check whether or not the Enhanced Cooling Mode (ECM) is already enabled. Make
sure there are Gen3 fans in the Chassis and retry the operation.
Category Configuration
Subcategory FAN = Fan Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
479