Reference Guide

FAN904
Message Cannot enable the Enhanced Cooling Mode because the Maximum Power
Conservation Mode is enabled.
Detailed
Description
The Enhanced Cooling Mode cannot be enabled because the Maximum Power
Conservation Mode is enabled.
Recommended
Response
Action
Disable the Maximum Power Conservation Mode, and then retry the operation. To
disable the mode by using CMC Web interface, click Chassis Overview > Power >
Configuration. To disable the mode using the RACADM utility, run the command
"racadm config -g cfgThermal -o cfgThermalEnhancedCoolingMode 0".
Category Configuration
Subcategory FAN = Fan Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
FAN905
Message Applying fan configuration settings. This may take several seconds.
Detailed
Description
Applying fan configuration settings. This may take several seconds.
Recommended
Response
Action
No response action required.
Category Configuration
Subcategory FAN = Fan Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
477