Reference Guide

Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
FAN8501
Message Enhanced Cooling Mode is Disabled
Detailed
Description
Disabling Enhanced Cooling Mode allows for reduced power consumption by
reducing the maximum speed of the blowers while still providing sufficient blade
airflow.
Recommended
Response
Action
No response action is required.
Category Audit
Subcategory FAN = Fan Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
FAN8502
Message The blower arg1 is not detected, because it may not be operating optimally. Check
for the availability of latest CMC firmware.
Arguments
• arg1 = name
Detailed
Description
The current CMC firmware did not detect the blower identified in the message. To
resolve the issue, update the firmware. If the issue persists, contact your service
provider.
Recommended
Response
Action
Make sure that CMC is using the latest firmware, and then retry the operation.
Category Audit
473