Reference Guide

LCD Message No LCD message display defined.
Initial Default OS Log;None
Server
Administrator
Event ID
5303
Server
Administrator
Trap ID
Not Applicable
FAN0022
Message The arg1 sensor has failed, and the last recorded value by the sensor was arg2 RPM.
Arguments
• arg1 = sensor name
• arg2 = fan speed
Detailed
Description
The sensor identified in the message has failed. The sensor may be required for
optimal system performance.
Recommended
Response
Action
Check the Embedded System Management (ESM) Log for any sensor related faults.
If the fan sensor has failed, replace the system board. For more information,
contact your service provider.
Category System Health
Subcategory FAN = Fan Event
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default OS Log;None
Server
Administrator
Event ID
5100
Server
Administrator
Trap ID
Not Applicable
FAN0023
Message Unable to read the arg1 sensor value.
Arguments
• arg1 = sensor name
Detailed
Description
The fan sensor identified in the message has failed or the fan has failed.
467