Reference Guide

Arguments
• arg1 = enclosure name
Detailed
Description
The controller is not receiving a consistent response from the enclosure. There
could be a firmware problem or an invalid cabling configuration. If the cables are
too long, they degrade the signal.
Recommended
Response
Action
Power down all enclosures attached to the system and reboot . If the problem
persists, upgrade the firmware to the latest supported version. Verify the cable
configuration is valid. See the storage hardware documentation for valid cabling
configurations.
Category Storage
Subcategory ENC = Storage Enclosr
Severity Severity 1 (Critical)
Trap/EventID 4337
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
2268
Server
Administrator
Trap ID
10400
ENC25
Message arg1 has a hardware error.
Arguments
• arg1 = enclosure name
Detailed
Description
The enclosure or an enclosure component is in a Failed or Degraded state.
Recommended
Response
Action
Verify the health of the enclosure and its components. See the storage hardware
documentation for more information. Contact technical support.
Category Storage
Subcategory ENC = Storage Enclosr
Severity Severity 1 (Critical)
Trap/EventID 4337
LCD Message No LCD message display defined.
Initial Default LC Log
442