Reference Guide

Detailed
Description
There are too many enclosures attached to the controller port. When the
enclosure limit is exceeded, the controller loses contact with all enclosures
attached to the port. This is an unsupported configuration.
Recommended
Response
Action
Remove the extra enclosures. Refer to the storage hardware documentation for
maximum number of enclosures that can be connected.
Category Storage
Subcategory ENC = Storage Enclosr
Severity Severity 1 (Critical)
Trap/EventID 4337
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
2191
Server
Administrator
Trap ID
85400
ENC15
Message An enclosure blink operation has initiated on arg1 .
Arguments
• arg1 = Enclosure Name
Detailed
Description
This alert is provided for informational purposes.
Recommended
Response
Action
No response action is required.
Category Storage
Subcategory ENC = Storage Enclosr
Severity Severity 3 (Informational)
Trap/EventID 4339
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
2259
436