Reference Guide

Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
DIS109
Message Unable to start the AutoConfig file import operation, because an invalid End Host
Power State value is specified in the DHCP scope option field where the
VendorID=iDRAC.
Detailed
Description
The server could not be configured because the End Host Power State value
specified in the DHCP scope option field where the VendorID=iDRAC is incorrect.
Recommended
Response
Action
In the DHCP scope option field where VendorID=iDRAC, enter a end-host-power-
state (-e <0 or 1>) where 0 = Powered Off and = Powered On, and then retry the
operation.
Category Configuration
Subcategory DIS = Auto-Discovery
Severity Severity 3 (Informational)
Trap/EventID 10635
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
DIS110
Message The AutoConfig operation is completed.
Detailed
Description
The AutoConfig operation is completed.
Recommended
Response
Action
No response action is required
Category Configuration
424