Reference Guide

DIS107
Message Unable to start the AutoConfig file import operation, because an invalid AutoConfig
time-to-wait value is specified in the DHCP scope option field where the
VendorID=iDRAC.
Detailed
Description
Unable to start the AutoConfig file import operation, because an invalid AutoConfig
time-to-wait value is specified in the DHCP scope option field where the
VendorID=iDRAC.
Recommended
Response
Action
In the DHCP scope option field where VendorID=iDRAC, enter a time-to-wait (-t)
value more than 300 seconds and less than 3600 seconds and then retry the
operation.
Category Configuration
Subcategory DIS = Auto-Discovery
Severity Severity 3 (Informational)
Trap/EventID 10635
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
DIS108
Message Unable to start the AutoConfig import operation, because Lifecycle Controller is
not enabled.
Detailed
Description
The server could not be successfully configured, because Lifecycle Controller is
either not installed or not enabled.
Recommended
Response
Action
Verify that the Lifecycle Controller firmware on the server being configured is
installed and enabled, then restart the iDRAC by pressing the System ID button for
15 seconds. For more information about Lifecycle Controller, see the Lifecycle
Controller Users Guide available at dell.com/support/manuals.
Category Configuration
Subcategory DIS = Auto-Discovery
Severity Severity 3 (Informational)
Trap/EventID 10635
LCD Message No LCD message display defined.
423