Reference Guide

DIS102
Message Unable to start the AutoConfig import operation, because the AutoConfig import
file is not available.
Detailed
Description
The AutoConfig configuration import operation could not be started, because the
AutoConfig .xml file is not available in the sharename or location specified in the
DHCP scope option field where the VendorID=iDRAC.
Recommended
Response
Action
Update the sharename or location in the DHCP scope option field where the
VendorID=iDRAC, make sure the AutoConfig import file is available, and then retry
the operation.
Category Configuration
Subcategory DIS = Auto-Discovery
Severity Severity 3 (Informational)
Trap/EventID 10635
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
DIS103
Message The AutoConfig operation is unable to access a network share folder, because
incorrect credentials are specified in the DHCP scope option field where the
VendorID=iDRAC.
Detailed
Description
The network share folder cannot be accessed by using the credentials specified in
the DHCP scope option field where the VendorID=iDRAC.
Recommended
Response
Action
Verify whether or not the following are correctly entered in the DHCP scope
option field where the VendorID=iDRAC, and then retry the operation: 1) Network
share name. 2) The IP address of the network share folder. 3) The username and
password (-u <username> & -p <password>)
Category Configuration
Subcategory DIS = Auto-Discovery
Severity Severity 3 (Informational)
Trap/EventID 10635
LCD Message No LCD message display defined.
420