Reference Guide

Server
Administrator
Trap ID
Not Applicable
DIAG8005
Message LCD BIST not supported. or Fan - Fan speed failure. Expected at least arg1 ,
observed arg2 .
Arguments
• arg1 = RPM
• arg2 = RPM
Detailed
Description
Recommended
Response
Action
If LCD BIST error: The LCD BIST may not exist on all systems. Make sure that the
BIOS is current and rerun the diagnostics. If Fan speed error: Insure fans are not
dirty or obstructed and check for a loose connection.
Category System Health
Subcategory DIAG = Diagnostic
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
DIAG8006
Message Fan - Unable to set fans to arg1 speed. or No chipset event timer!
Arguments
• arg1 = High, Low, Original
Detailed
Description
Recommended
Response
Action
Should not occur
Category System Health
Subcategory DIAG = Diagnostic
391