Reference Guide

Detailed
Description
Recommended
Response
Action
Retry the diagnostics; if the problem persists, the fan is faulty. Make sure that the
BIOS is current and retry the diagnostics.
Category System Health
Subcategory DIAG = Diagnostic
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
DIAG0620
Message Network arg1 - arg2
Arguments
• arg1 = Number
• arg2 = Failure Message
Detailed
Description
UEFI Driver provides a DIAGNOSTIC protocol and this protocol supplies a test that
failed. Failure Message may be "Packet loopback test failed" or "Register test failed"
or something else. Provided by driver not ePSA.
Recommended
Response
Action
The Network (Ethernet) device may be faulty. Check for bent pins in the Ethernet
connector. Make sure that Network device firmware is current. Retry test, if still
fails, replace the NIC/NDC/LOM Network device. This may be on the motherboard,
or an adapter, or a daughter card, depending on the system.
Category System Health
Subcategory DIAG = Diagnostic
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
387