Reference Guide

Detailed
Description
Recommended
Response
Action
SMART Predictive Failure indicates the hard drive has failed SMART and maybe
nearing the end of its life. Other types of <Error Reason> in this category may
indicate an intermittent or firmware problem, rerun the test again. Desktops,
servers: Check the hard disk drive cables and connections. All systems: If error
persists, make sure that hard disk drive firmware and BIOS are current. The
<80000000000000??> value is an EFI error code returned by the driver.
Category Storage
Subcategory DIAG = Diagnostic
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
DIAG0152
Message Optical Drive arg1 - Incorrect status = arg2 arg3 .
Arguments
• arg1 = Nth Drive
• arg2 = Hex
• arg3 = Error Reason
Detailed
Description
Recommended
Response
Action
Check the drive cables and connections. If error persists, make sure that drive
firmware and BIOS are current. The <80000000000000??> value is an EFI error
code returned by the driver.
Category Storage
Subcategory DIAG = Diagnostic
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
366