Reference Guide

Server
Administrator
Trap ID
Not Applicable
DIAG0123
Message UEFI: Memory error detected. :OR: LEGACY: Memory - integrity test discrepancy.
Detailed
Description
Recommended
Response
Action
MemRX not enabled or not supported. Servers UEFI: Power down system and re-
seat DIMMS. Retry test and if no error occurs it was a DIMM connection issue.
Client LEGACY: Power down system and re-seat DIMMS. Retry test and if no error
occurs it was a DIMM connection issue. Check for latest BIOS.
Category System Health
Subcategory DIAG = Diagnostic
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
DIAG0124
Message arg1 , arg2
Arguments
• arg1 = Timestamp
• arg2 = Log message
Detailed
Description
Log message is different for the log type supported by the system. An IPMI log may
refer to "SEL", other log types also exist.
Recommended
Response
Action
Depends on <Log message>.
Category System Health
Subcategory DIAG = Diagnostic
Severity Severity 3 (Informational)
356