Reference Guide

CTL49
Message The NVRAM has corrupted data on arg1 .
Arguments
• arg1 = Controller name
Detailed
Description
The NVRAM has corrupted data. This may occur after a power surge, a battery
failure, or for other reasons. The controller is reinitializing the NVRAM.
Recommended
Response
Action
No response action is required as the controller is taking the required corrective
action. However, If this message is generated often (such as during each reboot),
then replace the controller.
Category Storage
Subcategory CTL = Storage Contr
Severity Severity 2 (Warning)
Trap/EventID 4330
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
2327
Server
Administrator
Trap ID
75300
CTL5
Message Bad block replacement error on arg1 .
Arguments
• arg1 = Controller name
Detailed
Description
A portion of a physical disk is damaged. See Receive a "Bad Block" Alert with
"Replacement," "Sense," or "Medium" Error for more information.
Recommended
Response
Action
See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for
more information.
Category Storage
Subcategory CTL = Storage Contr
Severity Severity 2 (Warning)
Trap/EventID 4330
321