Reference Guide

Recommended
Response
Action
1) Check system and operating system logs for exceptions. If no exceptions are
found continue. 2) Turn system off and remove input power for one minute. Re-
apply input power and turn system on. 3) Make sure the processor is seated
correctly. 4) If the issue still persists, contact technical support. Refer to the
product documentation to choose a convenient contact method.
Category System Health
Subcategory CPU = Processor
Severity Severity 1 (Critical)
Trap/EventID 2241
LCD Message CPU <number> machine check error detected. Power cycle system
Initial Default IPMI Alert;LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
CPU0800
Message CPU arg1 voltage regulator module is present.
Arguments
• arg1 = number
Detailed
Description
None
Recommended
Response
Action
No response action is required.
Category System Health
Subcategory CPU = Processor
Severity Severity 3 (Informational)
Trap/EventID 2243
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
275