Reference Guide

CPU0003
Message CPU arg1 is stuck in POST.
Arguments
• arg1 = number
Detailed
Description
None
Recommended
Response
Action
1) Turn off the server and disconnect input power for one minute. Re-apply input
power and turn system on. 2) Reduce system configuration to minimum memory
and remove all PCI devices. If system completes POST, update system BIOS. Re-
install memory and PCI one component at a time to meet the original
configuration. 3) If the issue still persists, contact technical support. Refer to the
product documentation to choose a convenient contact method.
Category System Health
Subcategory CPU = Processor
Severity Severity 1 (Critical)
Trap/EventID 2241
LCD Message No LCD message display defined.
Initial Default IPMI Alert;LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
CPU0004
Message CPU arg1 failed to initialize.
Arguments
• arg1 = number
Detailed
Description
None
Recommended
Response
Action
1) Turn system off and remove input power for one minute. Re-apply input power
and turn system on. 2) Make sure the processor is inserted correctly, if the
processor is removable. 3) If the issue still persists, contact technical support. Refer
to the product documentation to choose a convenient contact method.
Category System Health
Subcategory CPU = Processor
264