Reference Guide

• arg2 = bay ID
• arg3 = connector name
Detailed
Description
The cable identified in the message is incorrectly connected to the backplane
connector.
Recommended
Response
Action
Make sure the cable identified in the message is cabled correctly. If the issue
persists, contact your service provider.
Category System Health
Subcategory CBL = Cable
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
CBL0005
Message Backplane arg1 arg2 connector incorrectly connected to the motherboard SATA
controller.
Arguments
• arg1 = bay ID
• arg2 = connector name
Detailed
Description
The backplane connector identified in the message is incorrectly connected to the
motherboard SATA controller.
Recommended
Response
Action
Make sure the cable identified in the message is cabled correctly. If the issue
persists, contact your service provider.
Category System Health
Subcategory CBL = Cable
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
258