Reference Guide

BOOT016
Message Input source argument value for the boot device is incorrect or not found among
the boot devices on the system.
Detailed
Description
The input source argument value referring to the boot device is incorrect or empty.
The boot device identifier must match the InstanceID for the BootSourceSetting
instance that represents the boot device.
Recommended
Response
Action
Use the correct source argument value for the boot device and retry the operation.
Category Configuration
Subcategory BOOT = BOOT Control
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
BOOT017
Message Source argument does not support enable or disable mode.
Detailed
Description
The boot device(s) specified in the source argument used in the operation cannot
be enabled or disabled. This behavior applies to BCV devices and one-time boot.
Recommended
Response
Action
Refer to the documentation on validity of operation for the boot device specified.
For more information on the operation, see Lifecycle Controller-Remote Services
documentation.
Category Configuration
Subcategory BOOT = BOOT Control
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
254