Reference Guide

Server
Administrator
Trap ID
Not Applicable
BIOS021
Message Cannot authenticate BIOS password.
Detailed
Description
The old BIOS password specified in the change BIOS password operation was
incorrect.
Recommended
Response
Action
Retry the operation with correct old BIOS password.
Category Configuration
Subcategory BIOS = BIOS Management
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
BIOS022
Message Cannot set the BIOS password. Password is disabled due to a jumper setting on the
motherboard.
Detailed
Description
The BIOS password is disabled in the hardware using a jumper and can not be set.
See the system owners manual for jumper location.
Recommended
Response
Action
Change the jumper setting on the system board to enable changing the BIOS
password.
Category Configuration
Subcategory BIOS = BIOS Management
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
238