Reference Guide

Initial Default IPMI Alert;LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
VLT0216
Message The disk drive bay arg1 voltage is outside of range.
Arguments
• arg1 = name
Detailed
Description
System hardware detected an over voltage or under voltage condition. If multiple
voltage exceptions occur consecutively the system may power down in failsafe
mode.
Recommended
Response
Action
1) Review system logs for power supply exceptions. 2) Reseat hard disks in the bay.
Reconnect all cables attached to the bay. 3) If the problem persists, contact
technical support. Refer to the product documentation to choose a convenient
contact method.
Category System Health
Subcategory VLT = Voltage
Severity Severity 1 (Critical)
Trap/EventID 2169
LCD Message No LCD message display defined.
Initial Default IPMI Alert;LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
VLT0217
Message The disk drive bay arg1 voltage is within range.
Arguments
• arg1 = name
Detailed
Description
None
2244