Reference Guide

Recommended
Response
Action
Enable the vFlash media by running the command racadm set
idrac.vFlashSD.Enable 1.
Category System Health
Subcategory VFL = vFlash Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
VFL0013
Message The vFlash SD Card is in read-only mode.
Detailed
Description
The request could not be successfully completd, because the vFlash SD Card is in
read-only mode. Write operations cannot be performed on the card.
Recommended
Response
Action
Change the access mode on the vFlash SD Card to read-write.
Category System Health
Subcategory VFL = vFlash Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
VFL0014
Message The vFlash SD card is not initialized.
2207