Reference Guide

67
VF Event Messages
VF001
Message Command successful.
Detailed
Description
The command was successful
Recommended
Response
Action
No response action is required.
Category Configuration
Subcategory VF = vFlash Media
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
VF002
Message General failure
Detailed
Description
The operation did not complete successfully because of an internal issue with the
firmware.
Recommended
Response
Action
Do one of the following: 1) Rerun the command after about 2 minutes 2) Reset
iDRAC and rerun the command.
Category Configuration
Subcategory VF = vFlash Media
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
2173