Reference Guide

66
VDR Event Messages
VDR1
Message arg1 failed.
Arguments
• arg1 = VD Name
Detailed
Description
A storage component such as a physical disk or an enclosure has failed. The failed
component may have been identified by the controller while performing a task
such as a rescan or a check consistency.
Recommended
Response
Action
Replace the failed component. You can identify which component has failed by
locating the component that has a red "X" for its status. Perform a rescan after
replacing the failed component.
Category Storage
Subcategory VDR = Virtual Disk
Severity Severity 1 (Critical)
Trap/EventID 4353
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
VDR10
Message Formatting the arg1 has started.
Arguments
• arg1 = VD Name
Detailed
Description
This alert is provided for informational purposes.
2122