Reference Guide

Detailed
Description
The System Service Mode (SSM) cannot be entered because the Lifecycle
Controller (LC) firmware was not accessible. This situation is caused by missing LC
files.
Recommended
Response
Action
Do one of the following: 1) Restart the system and retry the operation. 2) Update
the iDRAC firmware. If the issue persists, contact your service provider.
Category System Health
Subcategory UEFI = UEFI Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
UEFI0142
Message Unable to enter System Service Mode (SSM) because the Lifecycle Controller (LC)
firmware was unable to complete a requested task or function.
Detailed
Description
The System Service Mode (SSM) cannot be entered because the Lifecycle
Controller (LC) firmware was unable to complete a requested task or function.
Recommended
Response
Action
Do one of the following: 1) Restart the system and retry the operation. 2) Update
the iDRAC firmware. If the issue persists, contact your service provider.
Category System Health
Subcategory UEFI = UEFI Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
2092