Reference Guide

UEFI0134
Message Unable to allocate Memory Mapped Input Output (MMIO) resources for one or
more PCIe devices because of insufficient MMIO memory.
Detailed
Description
Unable to allocate Memory Mapped Input Output (MMIO) resources for one or
more PCIe devices because of insufficient MMIO memory.
Recommended
Response
Action
Do one of the following: 1) Remove unused PCIe card(s) to free up MMIO space. 2)
Go to System Setup and enable the Memory Mapped I/O above 4GB option.
Category Configuration
Subcategory UEFI = UEFI Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default LC Log;None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
UEFI0135
Message Unable to execute CSIOR (Collect System Inventory on Restart) because the
Lifecycle Controller (LC) firmware was not accessible.
Detailed
Description
The CSIOR (Collect System Inventory on Restart) operation cannot be executed
because the Lifecycle Controller (LC) firmware was not accessible. This issue is
caused by LC partition attach issues.
Recommended
Response
Action
Do one of the following: 1) Restart the system and retry the operation. 2) Update
the iDRAC firmware. If the issue persists, contact your service provider.
Category System Health
Subcategory UEFI = UEFI Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
2088