Reference Guide

Recommended
Response
Action
Check the DIMM population and hardware configuration to make sure the Memory
Mirroring feature can be supported. For more information, see the platform
Owners Manual.
Category Configuration
Subcategory UEFI = UEFI Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
UEFI0114
Message Unable to enable the Fault Resilient Memory (FRM) operating mode because of
mismatches in DIMM channel configurations.
Detailed
Description
The Fault Resilient Memory (FRM) operating mode cannot be enabled because of
mismatches in DIMM channel configurations.
Recommended
Response
Action
Make sure identical memory modules in corresponding slots of channel pairs are
populated. For more information, see the platform Owners Manual.
Category Configuration
Subcategory UEFI = UEFI Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
UEFI0115
Message The Management Engine firmware has recovered from one or more correctable
errors.
2077