Reference Guide

UEFI0101
Message Total amount of installed memory has exceeded limit.
Detailed
Description
The total amount of installed memory has exceeded the amount supported by the
platform.
Recommended
Response
Action
Remove memory modules from the system to reduce the total amount of installed
memory. For more information on installed memory limit, see the platform Owners
Manual.
Category Configuration
Subcategory UEFI = UEFI Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
UEFI0102
Message Unable to enable the Memory Sparing feature because the current DIMM
population or hardware configuration does not support the feature.
Detailed
Description
The Memory Sparing feature cannot be enabled because the current DIMM
population or hardware configuration does not support the feature.
Recommended
Response
Action
Check the DIMM population and hardware configuration to make sure Memory
Sparing feature can be supported. For more information, see the platform Owners
Manual.
Category Configuration
Subcategory UEFI = UEFI Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
2070