Reference Guide

Detailed
Description
The Memory Mirroring feature cannot be enabled because the current DIMM
population or hardware configuration does not support the feature.
Recommended
Response
Action
Check the DIMM population and hardware configuration to make sure the Memory
Mirroring feature can be supported. For more information, see platform Owners
Manual.
Category Configuration
Subcategory UEFI = UEFI Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
UEFI0100
Message Unable to enable the Memory Mirroring feature because of mismatches in the
DIMM channel configurations.
Detailed
Description
The Memory Mirroring feature cannot be enabled because of mismatches in the
DIMM channel configurations.
Recommended
Response
Action
Make sure identical memory modules in corresponding slots of channel pairs are
populated. For more information, see the platform Owners Manual.
Category Configuration
Subcategory UEFI = UEFI Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
2069