Reference Guide

Server
Administrator
Trap ID
Not Applicable
UEFI0080
Message PCIe link speed is not optimal for arg1 . Expected link speed: Gen arg2 and actual
link speed: Gen arg3 .
Arguments
• arg1 = PCIe device
• arg2 = generation number
• arg3 = generation number
Detailed
Description
The PCIe link speed is not optimal for the identified PCIe device.
Recommended
Response
Action
Do one of the following: 1) Turn off the input power to the system and turn on
again. 2) Update the PCIe device firmware. If the issue persists, contact your service
provider.
Category System Health
Subcategory UEFI = UEFI Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
UEFI0081
Message Memory size has changed from the last time the system was started.
Detailed
Description
Memory size has changed from the last time the system was started. No action is
required if memory was added or removed.
Recommended
Response
Action
If the change is expected, no action is necessary. Otherwise, check the DIMM
population inside the system and memory settings in System Setup for
configuration changes. For more information, see the platform Owners Manual.
Category Configuration
Subcategory UEFI = UEFI Event
Severity Severity 2 (Warning)
2058