Reference Guide

Detailed
Description
The BIOS passwords are disabled because the PWRD_EN jumper is removed from
the system board.
Recommended
Response
Action
To enable the BIOS passwords, install the PWRD_EN jumper.
Category Configuration
Subcategory UEFI = UEFI Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
UEFI0036
Message Unable to initialize the iDRAC Shared Memory Architecture (SMA) interface.
Detailed
Description
The iDRAC Shared Memory Architecture (SMA) interface cannot be initialized. The
BIOS will use the Keyboard Controller Style (KCS) interface.
Recommended
Response
Action
Do one of the following: 1) Remove input power from the system, wait for 30
seconds, and re-apply input power. Turn on the system. 2) Update the iDRAC
firmware on the system.
Category System Health
Subcategory UEFI = UEFI Event
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
2033